banner-product

I-Black Dacromet Coating Paint Top Coat JH-9321

Inkcazelo emfutshane:

Igama lebrand:JUNHE

Inombolo yoMfanekiso:JH-9321


Iinkcukacha zeMveliso

Iithegi zeMveliso

Intlawulo kunye neMiqathango yokuThumela:
Ubuncinane boMyinge wokuodola:Iikhilogram ezili-100
Ixabiso:Kuyathethwana
Iinkcukacha zokuPakisha:30kg / umphanda weplastiki
Ixesha lokuzisa:Kwiintsuku ezilishumi emva kokufumana intlawulo kwangaphambili
Ubunakho bokubonelela:Iitoni ezi-2 ngosuku

Umbala:Mnyama
PH:8.0-9.0
Viscosity:≥50s
Ukutyeba kwefilimu eyomileyo:10-20 (micron)
Ukuqina:≥1
Ukuncamathela (iqondo):≤1

Inkcazo

I-1) Isithako esiphambili sisisiseko samanzi i-silica ye-inorganic , ixutywe kunye nomncedisi wokukhusela i-corrosion.
2) Ixabiso lemveliso liphantsi.
3) Umaleko wokugquma ugudile, ubuthathaka kunye ne-alkali ukumelana.

Idatha yobuGcisa:
Hayi. Into Idatha
1 Imbonakalo Imnyama, ilungile kwaye igudile
2 Viscosity ≥50s
3 PH 8.0-9.0
4 Ukutyeba kwefilimu eyomileyo 10-20 (micron)
5 Ukuqina ≥1
6 Ukuncamathela(iqondo) ≤1
7 Goba 1(mm)
8 ukumelana nobushushu kunye nokufuma 240 (h)

 
Imiyalelo nengqalelo:
1. Dip ukutyabeka, Ukutshiza ukutyabeka njl;
2. Kufuneka ishukunyiswe ngokupheleleyo ukuze isetyenziswe;amanzi adibeneyo okanye amanzi adibeneyo angasetyenziselwa ukulungisa i-viscosity;Ukusebenza kwe-viscosity: 30-60s.
3. Xa ukufuma kokusingqongileyo kungaphezulu kwama-85%, unokongeza utywala obuthile bemizi-mveliso ukulungelelanisa i-viscosity;
4. Imeko yokunyanga: 80℃/10min+140℃/30min;
5. Isixhobo sokucoca: Amanzi abalekayo anokusetyenziswa;
6. Gwema izinto ze-asidi, okanye i-polymerization kunye nokuwohloka kuya kwenzeka;
7. Le mveliso ingasetyenziswa yodwa, i-coated surface icela i-oyile ikhululekile, ayinathuli kwaye yomile, ingcono ukwenza unyango lwangaphambili lwe-degreasing, derusting, kunye ne-phosphating.

Indlela yokuqhuba:
I-1 yesiseko-ingubo + i-1 yengubo ephezulu
B 2 idyasi yesiseko+ 1 Idyasi ephezulu (ukhuseleko lomhlwa onzima)
Ubuchwephesha be-Electroplated Zinc Coating, i-Black Dacromet Plating ye-Alkali eNganyangekiyo

Inkqubo yeParameter:
Dip Coating lobushushu RT
Ukusebenza kweViscosity 45-60 S
I-Centrifuge 210 ~ 270 RPM / min 10s X 4-8 amaxesha
(Isixhobo se-Centrifuge asinakuxutywa sisetyenziswe ne-spin dyrer)
Ubushushu bokutshiza bokutshiza RT
Ukusebenza kweViscosity 30~40 S
Ukunyanga: 80℃ 10min + 140℃ 20—30min
Ukukhuselwa kokutya kokuhamba kwenkqubo b
Ukuchasana nokuCorrosion: ≥1500h (NSS)
Ukumelana namanzi olwandle: 25℃≥1500h

Idatha yoBugcisa

Hayi. Into Idatha
1 Imbonakalo Imnyama, ilungile kwaye igudile
2 Viscosity ≥50s
3 PH 8.0-9.0
4 Ukutyeba kwefilimu eyomileyo 10-20 (micron)
5 Ukuqina ≥1
6 Ukuncamathela(iqondo) ≤1
7 Goba 1(mm)
8 ukumelana nobushushu kunye nokufuma 240 (h)

  • Ngaphambili:
  • Okulandelayo:

  • Bhala umyalezo wakho apha kwaye uwuthumele kuthi